| Alarm Output |
1 relay contact, 300V AC / DC at 130 mA maximum
|
| AES |
1.0 to 1 / 10, 000 (auto)
|
| Day/Night Mode |
Smart / Auto / On / Off
|
| Dimensions |
163 x 163 x 104 mm (6.43 x 6.43 x 4.09 in.)
|
| Firmware Upgrade |
Flash memory for upgrade of camera firmware over the network
|
| Scanning Mode |
Progressive
|
| Security |
User account with password protection and IP filter
|
| Sensitivity |
0.6 (color)/0.03 (BW), 0 Lux with IR illuminator ON, measured with DSS OFF at 30 IRE
|
| Signal to Noise Ratio |
±50 dB
|
| Tamper Detection |
On / Off / schedule
|
| Warranty |
According to FLIR RMA Policy and Process Notice document
|
| Alarm In |
1 dry alarm contact
|
| Audio Connections |
Terminal block
|
| Bi-directional Audio |
Full duplex, line in and line out, G.711, G.726
|
| International |
CE (EN55022-1998 Class A; EN50130-4; EN60950; RoHS) CE (EN55022-1998 Class A; EN50130-4; EN60950; RoHS)
|
| USA |
FCC 47 CFR Part 15, Subpart B, Class A; UL 60950
|
| Ethernet |
10/100/1000 Ethernet, auto sensing, half/full duplex (RJ45)
|
| Network Protocol |
IPv4/v6, TCP/IP, UDP Unicast / Multicast, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, SNTP, QoS, ONVIF Profile S, IEEE 802.1X
|
| Remote Configuration |
Via web browser or supported video management software
|
| Supported Web Browser |
Internet Explorer 10+
|
| Humidity |
90% (non-condensing)
|
| Storage Temperature |
-20° to 70° C (-4° to 158° F)
|
| Operating Temperature |
-10° to 50° C (-10° to 122° F)
|
| DSS |
1/1 to 1/25 or 1/30 with up to 32x sensitivity boost in color or night mode
|
| Image Sensor |
1/1.8" BSI CMOS
|
| Lens Type |
Fisheye 1.05mm, 180° HFOV, F2.8, D/N
|
| Mechanical IR Cut Filter |
Yes
|
| Noise Reduction |
2D / 3D / Color
|
| Sensor Resolution |
3072 x 2048
|
| White Balance |
Auto / ATW / One push / manual
|
| Wide Dynamic Range |
On / Off – 3 levels
|
| Backlight Compression |
On / Off
|
| Peak Emission Wavelength [nm] |
850
|
| IR Distance |
Up to 6 m (20 ft.)
|
| Angle of Illumination |
360°
|
| LED Type |
High power / high efficiency SMD type
|
| Automatic Gain Control |
Auto
|
| Enclosure |
Indoor/Outdoor: IK10 rated vandal IP66
|
| Unit Weight |
0.95 Kg (2.09 lbs.)
|
| Bubble F-Stop |
F0.0
|
| Bubble Rating |
IK10 vandal resistant polycarbonate
|
| Input Voltage |
12 VDC PoE (Class 0)
|
| Power Connection |
DC terminal block or PoE
|
| Power Consumption |
8W / 10W with IR
|
| Rate Control |
CBR/VBR
|
| Resolution Range |
Scalable from D1 to 3072×2048
|
| Video Motion Detection |
On / Off / schedule
|
| Maximum Performance Camera De-warping |
H.264 20FPS @ 2048×2048 + D1 (NTSC/PAL)
|
| Maximum Performance Software De-warping |
H.264 30/25 FPS @ 3072×2048 + 720p (NTSC/PAL)
|
| SD Card Recording1 |
Micro SDXC up to 128GB (Class 10)
|
| Video Bandwidth |
Configurable between 64Kbps and 20Mbps
|
