Subscribe to our newsletter

PQ34-30: 3000A Current Flexible Clamp Probes

Set of 3 clamp probes with 24″ (600mm) perimeter

View Datasheet > PQ34-30


PQ34-30 is a set of 3000-Amp flexible current probes for PQ3450/PQ3470 power quality analyzers. 24 in. (600 mm) for wrapping around bus bars and wire bundles. Switch between 3 ranges; 3000-amp, 300-amp, 30-amp.

Additional information

Measurement ranges

30A, 300A and 3000A, switch selectable

Output sensitivity

100mV/A on the 30A range 10mV/A on the 300A range 1mV/A on the 3000A range

Output coupling

AC coupled.

Accuracy (50/60Hz)

± 1% F.S. @ 23 ± 5°C (50/60Hz)

Frequency range

45 to 400 Hz.

Phase error (50/60Hz)

< ± 1°

Minimum load

100 K ohm for specified accuracy


±0.2% of reading from 10% to 100% of range

Phase error

<±1.5° (50/60Hz)

Conductor position sensitivity

± 2% F.S (conductor should be >25mm (1") from the probe latch).

Enclosure material

UL 94-V0 rated


IEC 1010, Category III 600V

Power Supply

8V± 1V (supplied from meter)

Operating Temperature

0°C to 50°C (32°F to 122°F)

Operating Humidity

Less than 80% RH

Circuit box:

105 x 56.5 x 33 mm. (4.1 X 2.2 X 1.3")

Flexible probe:

600mm (23.6") (length), 14.5mm 0.57" (diameter)

Cable length :

3.4 meters (11.2 feet)

DC plug size :

5.5 mm x 2.5 mm DIA.


480 g (1.06 LB)

Please leave your details below so we can get in touch with you.

Contact Info