| Base Mounting |
2 × M4 thread mounting holes (on three sides)
|
| Detector Type |
Focal Plane Array (FPA), uncooled microbolometer
|
| Focal Length |
18 mm (0.7 in.)
|
| Housing material |
Aluminum
|
| IR Resolution |
320 × 240 pixels
|
| Spectral Range |
7.5–13 µm
|
| Tripod Mounting |
UNC 1/4"-20 (on three sides)
|
| Contents |
Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)
|
| Digital I/O connector type |
6-pole jackable screw terminal
|
| Digital I/O isolation voltage |
500 VRMS
|
| Digital I/O supply voltage |
6–24 VDC, max. 200 mA
|
| Digital input purpose |
Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read)
|
| Digital Output Purpose |
Output to ext. device (programmatically set)
|
| Digital Outputs |
2 opto-isolated, ON = supply (max. 100 mA), OFF = open
|
| Ethernet |
Control and image
|
| Ethernet Communication |
TCP/IP socket-based FLIR proprietary and GenICam protocol
|
| Ethernet Connector Type |
RJ-45
|
| Ethernet Image Streaming |
16-bit 320 × 240 pixels @ 60 Hz – Signal linear – Temperature linear – Radiometric GigE Vision and GenICam compatible
|
| Ethernet Protocols |
TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
|
| Ethernet Standard |
IEEE 802.3
|
| Ethernet Type |
Gigabit Ethernet
|
| Atmospheric transmission correction |
Automatic, based on inputs for distance, atmospheric temperature and relative humidity
|
| EMC |
EN 61000-6-2 (Immunity), EN 61000-6-3 (Emission), FCC 47 CFR Part 15 Class B (Emission)
|
| Emissivity Correction |
Variable from 0.01 to 1.0
|
| Encapsulation |
IP 66 (IEC 60529)
|
| Humidity (Operating and Storage) |
IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
|
| Operating Temperature Range |
–15°C to +50°C (+5°F to +122°F)
|
| Shock |
25 g (IEC 60068-2-27)
|
| Storage Temperature Range |
–40°C to +70°C (–40°F to +158°F)
|
| Vibration |
2 g (IEC 60068-2-6)
|
| Detector Pitch |
25 µm
|
| Detector Time Constant |
Typical 12 ms
|
| f-number |
1.3
|
| Field of view (FOV) |
25° × 18.8°
|
| Focus |
Automatic or manual (built in motor)
|
| Image Frequency |
9 Hz
|
| Lens Identification |
Automatic
|
| Minimum Focus Distance |
0.4 m (1.31 ft.)
|
| Spatial resolution (IFOV) |
1.36 mrad
|
| Accuracy |
±2°C (±3.6°F) or ±2% of reading
|
| External Optics & Windows Correction |
Automatic, based on input of optics/window transmission and temperature
|
| Measurement Corrections |
Global object parameters
|
| Object Temperature Range |
–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
|
| Optics Transmission Correction |
Automatic, based on signals from internal sensors
|
| Reflected apparent temperature correction |
Automatic, based on input of reflected temperature
|
| Thermal Sensitivity/NETD |
< 0.05°C @ +30°C (+86°F) / 50 mK
|
| External Power Connector Type |
2-pole jackable screw terminal
|
| External Power Operation |
12/24 VDC, 24 W absolute max.
|
| Voltage |
Allowed range 10–30 VDC
|
