Subscribe to our newsletter

FLIR A315

IR Tempreture Sensor with GIGE (Motorized Focus)

View Datasheet > FLIR A315:A615

Description

The FLIR A315 is a compact and affordable thermal imaging camera, fully controlled by a PC. Due to its compliance to standards, the FLIR A315 is Plug and Play with third-party machine vision software such as National Instruments, Cognex, Matrox, MVtec, and Stemmer Imaging.

Additional information

Base Mounting

2 × M4 thread mounting holes (on three sides)

Detector Type

Focal Plane Array (FPA), uncooled microbolometer

Focal Length

18 mm (0.7 in.)

Housing material

Aluminum

IR Resolution

320 × 240 pixels

Spectral Range

7.5–13 µm

Tripod Mounting

UNC 1/4"-20 (on three sides)

Contents

Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)

Digital I/O connector type

6-pole jackable screw terminal

Digital I/O isolation voltage

500 VRMS

Digital I/O supply voltage

6–24 VDC, max. 200 mA

Digital input purpose

Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read)

Digital Output Purpose

Output to ext. device (programmatically set)

Digital Outputs

2 opto-isolated, ON = supply (max. 100 mA), OFF = open

Ethernet

Control and image

Ethernet Communication

TCP/IP socket-based FLIR proprietary and GenICam protocol

Ethernet Connector Type

RJ-45

Ethernet Image Streaming

16-bit 320 × 240 pixels @ 60 Hz – Signal linear – Temperature linear – Radiometric GigE Vision and GenICam compatible

Ethernet Protocols

TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

Ethernet Standard

IEEE 802.3

Ethernet Type

Gigabit Ethernet

Atmospheric transmission correction

Automatic, based on inputs for distance, atmospheric temperature and relative humidity

EMC

EN 61000-6-2 (Immunity), EN 61000-6-3 (Emission), FCC 47 CFR Part 15 Class B (Emission)

Emissivity Correction

Variable from 0.01 to 1.0

Encapsulation

IP 66 (IEC 60529)

Humidity (Operating and Storage)

IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)

Operating Temperature Range

–15°C to +50°C (+5°F to +122°F)

Shock

25 g (IEC 60068-2-27)

Storage Temperature Range

–40°C to +70°C (–40°F to +158°F)

Vibration

2 g (IEC 60068-2-6)

Detector Pitch

25 µm

Detector Time Constant

Typical 12 ms

f-number

1.3

Field of view (FOV)

25° × 18.8°

Focus

Automatic or manual (built in motor)

Image Frequency

9 Hz

Lens Identification

Automatic

Minimum Focus Distance

0.4 m (1.31 ft.)

Spatial resolution (IFOV)

1.36 mrad

Accuracy

±2°C (±3.6°F) or ±2% of reading

External Optics & Windows Correction

Automatic, based on input of optics/window transmission and temperature

Measurement Corrections

Global object parameters

Object Temperature Range

–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)

Optics Transmission Correction

Automatic, based on signals from internal sensors

Reflected apparent temperature correction

Automatic, based on input of reflected temperature

Thermal Sensitivity/NETD

< 0.05°C @ +30°C (+86°F) / 50 mK

External Power Connector Type

2-pole jackable screw terminal

External Power Operation

12/24 VDC, 24 W absolute max.

Voltage

Allowed range 10–30 VDC

Please leave your details below so we can get in touch with you.

Contact Info