Falcon GSM

Falcon GSM

Falcon GSM

The FALCON is a state of the art GSM/GPRS alarm transmitter that features dual network SIM functionality. It is available with chip SIMs – These specialized SIMs reduce the chances of theft and fraud on your account because it is virtually impossible to remove them. The use of dual SIMs also reduces the chances of missing a signal in the event of a network failure.

The FALCON has seven programmable positive or negative trip inputs, two relay outputs and an on-board serial port with connection protocols to all the major control panels. This is combined with a DTMF contact ID TIP and RING interface, and SMS functionality to command relay outputs and change selected parameters.


Latest technology EDGE/ GPRS modem makes this unit hard to beat on speed. The lag time between sending and receiving of alarm signal are reduced, allowing for quicker reaction.


This unit is serialized for easier rerouting to a different base station, without having to bring the device in for a recode. The faster and bigger processor enables future protocol expansion.

Over-The-Air (ota)

Program this unit over-the-air with our Windows-based application which allows configuration programming for quick and hassle-free installation.


Monitor and control this unit through your mobile device using the “MiRhino” Application, available for download from Google Play Store and iStore.


Supply voltage Min: 6.5VDC Max: 15VDC Typical: 13.2VDC Power consumption standby 90mA @13.2VDC Power consumption during network interaction 150mA @ 13.2VDC Dry inputs voltage range 7 – 14VDC AC monitoring input voltage range 10 – 24VAC Output max rating 5A @ 24VAC/VDC


Quad-band 850/900/1800/1900MHz GPRS multi-slot class 12/10 GPRS mobile station class B Compliant to GSM phase 2/2+ – Class 4 (2 W @ 850/900MHz) – Class 1 (1 W @ 1800/1900MHz)


Dimensions 12.2cm (W) x 11.0cm (H) x 2.1cm (D) Housing 2mm ABS Plastic Packed Weight 225g

[contact-form-7 id="258" title="Contact form 1"]